MSPSim

From TinyOS Wiki
Revision as of 05:47, 15 December 2009 by Sissou (talk | contribs)
Jump to: navigation, search
Error creating thumbnail: File missing
MSPSim on Ubuntu

MSPSim is a Java-based simulator of the MSP430 microcontroller.

Installation

After dowloading the last version of MSPSIM, it can be install by entering the command:

make

in the MSPSim folder. A Jar package of MSPSim can be created with the command:

make jar

Then a mspsim.jar is created in the directory. For simplicity, you may want to create an alias to MSPSim:

alias mspsim="java -jar PATH_TO_MSPSIM/mspsim.jar"

After that, MSPSim can be lauched with the command mspsim

Usage

Help

You can enter the command help inside the MSPSim prompt to have a list of the available commands. Some help can be display for each command with the help command by entering:

help [command]

where [command] is the command name.

Blink application

We show in this section how to use MSPSIm on the Blink application. First we need to compile the application for the TelosB mote which uses the MSP430 microcontroller with the command:

make telosb

Since MSPSim can open ELF file we have to rename the program file:

mv build/telosb/main.exe build/telosb/main.elf

Then we can run MSPSim:

mspsim builb/telosb/main.elf

Five windows of MSPSim should open, in one of then you should see a picture of the mote with the LED blinking at different frequency. In the terminal you should obtain a MSPSim prompt:

Flash got reset!
MSPSim>Autoloading script: PATH_TO_MSPSIM/scripts/autorun.sc
-----------------------------------------------
MSPSim 0.97 starting firmware: main.elf
-----------------------------------------------
MSPSim>

Profiling

The MSPSim command profile can be useful to see the number of cycles elapsed in each function of the program. An example of output of this command is:

MSPSim>profile
************************* Profile Data **************************************
Function                                         Average    Calls  Tot.Cycles
McuSleepC$getPowerState                               55     4593     252615
Msp430ClockP$busyCalibrateDco                      26110        1      26110
MotePlatformC$Init$init                            10607        1      10607
Msp430TimerP$1$Event$fired                            14       35        490
Msp430ClockP$set_dco_calib                            23       13        299
MotePlatformC$TOSH_FLASH_M25P_DP                     259        1        259
MotePlatformC$TOSH_FLASH_M25P_DP_bit                  21        8        170
SchedulerBasicP$Scheduler$runNextTask                 17        2         34
__nesc_atomic_start                                   14        2         28
__nesc_atomic_end                                      8        1          8
********** Profile IRQ **************************
Vector          Average    Calls  Tot.Cycles
00                  0        0          0
01                  0        0          0
02                  0        0          0
03                  0        0          0
04                  0        0          0
05                 53     4557     241521
06                  0        0          0
07                  0        0          0
08                  0        0          0
09                  0        0          0
10                  0        0          0
11                  0        0          0
12                 58       35       2030
13                  0        0          0
14                  0        0          0
15                  0        0          0

The first profile shows for each function, the average number of cycles spent into, the number of calls to this function and the total number of cycles spent. The second profile shows the interrupt requests of the program.

Step by step execution

Another useful feature of MSPSim is the step by step execution. It can be done by clicking the button Stop of the main window of MSPSim, the window called MSPSim monitor. Then the program can be executed step by step with the button Single Step. The mode debug can be enabled with the button Debug On, this mode display more information of each step execution in the command line window. An example of such output is:

49aa:	3f f0 10 00 AND.W #$0010, R15	R15=0001 R0=49aa SR=--Z- SP=38fc; as = 3 sMem:0000
49ae:	07 24       JEQ $000e		SR=--Z-
49be:	5f 42 04 00 MOV.B &ME1, R15	R15=0000 R2=0002 SR=--Z- SP=38fc; as = 1 sMem:0000
49c2:	7f f0 c0 ff AND.B #$ffc0, R15	R15=0000 R0=49c2 SR=--Z- SP=38fc; as = 3 sMem:0000
49c6:	05 24       JEQ $000a		SR=--Z-

The step by step execution can also be executed in command line with the command step. This command accepts an integer as parameter which is the number of instructions to execute. An example of this command is :

MSPSim>step 10
   49d2:	5f 42 05 00 MOV.B &ME2, R15	R15=0000 R2=0002 SR=--Z- SP=38fc; as = 1 sMem:0000
   49d6:	7f f0 30 00 AND.B #$0030, R15	R15=0000 R0=49d6 SR=--Z- SP=38fc; as = 3 sMem:0000
   49da:	05 24       JEQ $000a		SR=--Z-
   49e6:	5f 42 70 00 MOV.B &UCTL_0, R15	R15=0000 R2=0002 SR=--Z- SP=38fc; as = 1 sMem:0000
   49ea:	5f f3       AND.B #1, R15	R15=0000 R3=0000 SR=--Z- SP=38fc; as = 1 sMem:0000
   49ec:	14 24       JEQ $0028		SR=--Z-
   4a16:	1f 42 a0 01 MOV.W &ADC12CTL0, R15	R15=0000 R2=0002 SR=--Z- SP=38fc; as = 1 sMem:0000
   4a1a:	3f f0 10 00 AND.W #$0010, R15	R15=0000 R0=4a1a SR=--Z- SP=38fc; as = 3 sMem:0000
   4a1e:	18 24       JEQ $0030		SR=--Z-
   4a50:	4f 4e       MOV.B R14, R15	R15=0000 R14=0004 SR=--Z- SP=38fc; as = 0 sMem:0000 
CPU stepped to: $4a52 in 21 cycles (6252752)

At the end of this command, the number of cycle elapsed is displayed.

Variables

See also

External links