CC1100/CC2500 Known Issues

From TinyOS Wiki
Revision as of 09:00, 8 February 2008 by Dmoss (talk | contribs)
Jump to: navigation, search

Bad Crc?

I have a sender node running the RadioCountsToLEDs app and a receiver node running the BaseStation App. I also have it setup to toggle LED2 if a bad CRC is detected as I did yesterday. It flashes receive LED1 for sometime but after awhile the receiver node starts flashing the LED2 instead of the receive LED1. I can fix the problem by pressing the reset button on the sender node and it will go back into normal routine but start over from count 0 obviously.


Dual-Radio Platforms

We haven't had any success getting a dual-radio platform to operate when both radios are turned on. It may be necessary to control the power to each radio on your platform with a FET switch. FET switches worked for our dual-radio platform.

Retrieved from "http://tinyos.stanford.edu/tinyos-wiki/index.php?title=CC1100/CC2500_Known_Issues&oldid=759"