Difference between revisions of "CoAP -03"
m (→TinyOS CoAP) |
|||
(12 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
− | = TinyOS CoAP | + | = TinyOS CoAP (-03) = |
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | '''This page is outdated!!!''' | ||
+ | |||
+ | CoapBlip has been updated to draft-ietf-core-coap-13. See detailed instruction for installing CoapBlip here: [[CoAP_-13]] | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
__TOC__ | __TOC__ | ||
− | This page describes how to setup the TinyOS CoAP implementation based on [http://sourceforge.net/projects/libcoap/ libcoap] and uses the TinyOS blip-rpl stack for UDP communication. | + | This page describes how to setup the TinyOS CoAP (-03) implementation based on [http://sourceforge.net/projects/libcoap/ libcoap] and uses the TinyOS blip-rpl stack for UDP communication. |
libcoap implements the Constrained Application Protocol (CoAP) [[http://tools.ietf.org/id/draft-ietf-core-coap-03.txt]] based on the following drafts: | libcoap implements the Constrained Application Protocol (CoAP) [[http://tools.ietf.org/id/draft-ietf-core-coap-03.txt]] based on the following drafts: | ||
Line 14: | Line 28: | ||
Furthermore, libcoap provides sample CoAP server and client implementations, which have participated in several plug-fests of the IETF CoRE working group. | Furthermore, libcoap provides sample CoAP server and client implementations, which have participated in several plug-fests of the IETF CoRE working group. | ||
+ | |||
+ | (Documentation for a test version of CoapBlip implementing coap-13 is available at [[CoAP -13]].) | ||
= TinyOS libcoap Adaptation Limitations= | = TinyOS libcoap Adaptation Limitations= | ||
Line 27: | Line 43: | ||
== Get the code == | == Get the code == | ||
− | + | Make sure you have [[Installing TinyOS|installed]] TinyOS and the source code. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
== Compile libcoap and examples == | == Compile libcoap and examples == | ||
Line 157: | Line 155: | ||
| align="center" | X | | align="center" | X | ||
| align="center" | X | | align="center" | X | ||
− | | align="center" | | + | | align="center" | LEDs |
|- | |- | ||
| scope="row" | /ck | | scope="row" | /ck | ||
Line 163: | Line 161: | ||
| align="center" | X | | align="center" | X | ||
| align="center" | AES Encryption Key | | align="center" | AES Encryption Key | ||
+ | |- | ||
+ | | scope="row" | /rt | ||
+ | | align="center" | X | ||
+ | | align="center" | | ||
+ | | align="center" | Routing Table | ||
|- | |- | ||
| scope="row" | .well-known/core | | scope="row" | .well-known/core |
Latest revision as of 23:43, 10 July 2013
TinyOS CoAP (-03)
This page is outdated!!!
CoapBlip has been updated to draft-ietf-core-coap-13. See detailed instruction for installing CoapBlip here: CoAP_-13
Contents
This page describes how to setup the TinyOS CoAP (-03) implementation based on libcoap and uses the TinyOS blip-rpl stack for UDP communication.
libcoap implements the Constrained Application Protocol (CoAP) [[1]] based on the following drafts:
- draft-ietf-core-coap-03
- draft-ietf-core-link-format-01
- draft-ietf-core-block-00
- draft-ietf-core-observe-00
- draft-bormann-coap-misc-06
Furthermore, libcoap provides sample CoAP server and client implementations, which have participated in several plug-fests of the IETF CoRE working group.
(Documentation for a test version of CoapBlip implementing coap-13 is available at CoAP -13.)
TinyOS libcoap Adaptation Limitations
- only GET and PUT methods supported, POST and DELETE methods not supported
- draft-ietf-core-block-00, draft-ietf-core-observe-00 not yet implemented, code needs to be changed from time.h to TinyOS timers
- currently only content-type application/octet-stream implemented
The code has been tested on TelosB nodes only, yet. The sample implementation depends on TelosB sensors.
Installation instructions
Get the code
Make sure you have installed TinyOS and the source code.
Compile libcoap and examples
cd $TOSROOT/support/sdk/c/coap autoconf ./configure make
Compile and install CoapBlip application
To install the CoAP application on the mote, attach the mote via USB and run the following set of commands:
cd $TOSROOT/apps/CoapBlip make telosb blip coap install,3 bsl,/dev/ttyUSB0
Setting up PppRouter and ppp connection
To install the PppRouter application for IPv6 support on the second attached mote, execute
cd $TOSROOT/apps/PppRouter
and edit the Makefile by commenting the following line (21) out:
PFLAGS += -DBLIP_DERIVE_SHORTADDRS
Then install the PppRouter on the mote:
make telosb blip install bsl,/dev/ttyUSB1
Next, start the ppp connection by executing
sudo pppd debug passive noauth nodetach 115200 /dev/ttyUSB1 nocrtscts nocdtrcts lcp-echo-interval 0 noccp noip ipv6 ::23,::24
After entering the sudo password, a similar output should be printed on your screen:
using channel 1 Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB1 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xc33c412b> <pcomp> <accomp>] rcvd [LCP ConfRej id=0x1 <magic 0xc33c412b> <pcomp>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <accomp>] rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <accomp>] rcvd [LCP ConfReq id=0x3 <mru 1280> <asyncmap 0x0> <accomp>] sent [LCP ConfAck id=0x3 <mru 1280> <asyncmap 0x0> <accomp>] sent [IPV6CP ConfReq id=0x1 <addr fe80::0000:0000:0000:0023>] rcvd [IPV6CP ConfReq id=0x1 <addr fe80::0000:0000:0000:0000>] sent [IPV6CP ConfNak id=0x1 <addr fe80::0000:0000:0000:0024>] rcvd [IPV6CP ConfReq id=0x2 <addr fe80::0000:0000:0000:0000>] sent [IPV6CP ConfNak id=0x2 <addr fe80::757d:cee8:dcad:b877>] rcvd [IPV6CP ConfReq id=0x3 <addr fe80::0000:0000:0000:0024>] sent [IPV6CP ConfAck id=0x3 <addr fe80::0000:0000:0000:0024>] sent [IPV6CP ConfReq id=0x1 <addr fe80::0000:0000:0000:0023>] rcvd [IPV6CP ConfAck id=0x1 <addr fe80::0000:0000:0000:0023>] local LL address fe80::0000:0000:0000:0023 remote LL address fe80::0000:0000:0000:0024 Script /etc/ppp/ipv6-up started (pid 23284) Script /etc/ppp/ipv6-up finished (pid 23284), status = 0x0
Open a new terminal and run
sudo ifconfig ppp0 add fec0::100/64
The ppp connection is now established.
Run CoAP example client
To run the CoAP example client and request a resource from the server execute the following commands :
cd $TOSROOT/support/sdk/c/coap/examples ./coap-client -m get coap://[fec0::3]:61616/<URI> -t binary
whereas URI specifies the resource you want to access and the response will be in binary representation. For TelosB motes, currently the following resources are supported and can be enabled/disabled in the Makefile of the CoAP application:
Note: Due to restricted memory capacities on TelosB motes, you may not be able to enable all resources at the same time!
Resource | GET | PUT | Comments |
---|---|---|---|
/st | X | - | Temperature |
/sh | X | - | Humidity |
/sv | X | - | Voltage |
/r | X | - | Temperature, Humidity and Voltage |
/l | X | X | LEDs |
/ck | (X) | X | AES Encryption Key |
/rt | X | Routing Table | |
.well-known/core | X | Well-Known URIs |
For using the PUT method, the following commands can be use:
LED's:
This command sets the LED's of the mote to state 2 (OFF, ON, OFF):
echo -e -n \\x02 | ./coap-client -m put coap://[fec0::3]:61616/l -T 3a -t binary -f -
AES Encryption Key:
Since the AES key contains 25 values, the most convenient way is to store the key in a file and send its content with the PUT method to the mote. To do so, at first create the HEX file with example values by using this command:
echo -e -n \\xFF\\x01\\x02\\x03\\x04\\x05\\x06\\x07\\x08\\x01\\x02\\x03\\x04\\x05\\x06\\x07\\x08\\x09\\x10\\x11\\x12\\x13\\x14\\x15\\x16 >> file
Then send the file to the mote by executing
./coap-client -m put coap://[fec0::3]:61616/ck -T 3a -t binary -f file
You can also, implemented for testing purposes, read the key from storage by using the GET method:
./coap-client -m get coap://[fec0::3]:61616/ck -T 3a -t binary
Important parts of TinyOS CoAP
$TOSROOT/apps/CoapBlip/* | Sample application | |||||
$TOSROOT/support/make/coap.extra | Makefile extension for CoAP | |||||
$TOSROOT/support/sdk/c/coap/* | libcoap C-Implementation | |||||
$TOSROOT/support/sdk/c/coap/example/* | Example client and server using libcoap | |||||
$TOSROOT/tos/lib/net/coap/* | Core libcoap TinyOS adaptation | |||||
|
CoAP interfaces |
Wiring your resource to the application
Accessing resources on the mote, parameterized ReadResource and WriteResource interfaces have been introduced to provide multiple independent instances of the same interface for all available resources. This design scheme saves code space, eliminates fan-outs and allows portability to different motes by simply changing the wiring. For hardware dependent calculations of the retrieved sensor values, the CoAPBuffer{Volt|Hum|Temp}Translate components have been introduced. These components can be optional used to transform the received buffer values from the sensors to human readable units using fixed-point calculations.
ReadResource
The ReadResource interface provides three functions:
interface ReadResource { command error_t get(coap_tid_t id); event void getDone(error_t result, coap_tid_t id, uint8_t asyn_message, uint8_t* val, size_t buflen); event void getDoneDeferred(coap_tid_t id); }
To read a resource, the get() command can be called. As parameter it takes the Message ID (id) to uniquely identify the response signaled back to the caller by getDone() or getDoneDeferred. The getDone() event is signaled if the sensor reading has finished within a predefined time (PREACK_TIMEOUT) to create a immediate response. In case of a deferred message response, i.e. sensor data retrieval takes longer as defined in PREACK_TIMEOUT, getDoneDeferred() is signaled to establish a asynchronous message exchange. Currently, the timeout is set to 500 ms and does not lead to any deferred message exchange on TelosB motes.
Example code to wire temperature and humidity sensor on TelosB motes:
configuration CoapBlipC { } implementation { CoapBlipP.CoAPServer -> CoapUdpServerC; components new SensirionSht11C() as HumTempSensor; components new CoapReadResourceC(uint16_t, KEY_TEMP) as CoapReadTempResource; components new CoapBufferTempTranslateC() as CoapBufferTempTranslate; CoapReadTempResource.Read -> CoapBufferTempTranslate.ReadTemp; CoapBufferTempTranslate.Read -> HumTempSensor.Temperature; CoapUdpServerC.ReadResource[KEY_TEMP] -> CoapReadTempResource.ReadResource; components new CoapReadResourceC(uint16_t, KEY_HUM) as CoapReadHumResource; components new CoapBufferHumTranslateC() as CoapBufferHumTranslate; CoapReadHumResource.Read -> CoapBufferHumTranslate.ReadHum; CoapBufferHumTranslate.Read -> HumTempSensor.Humidity; CoapUdpServerC.ReadResource[KEY_HUM] -> CoapReadHumResource.ReadResource; }
The mapping of the parameterized ReadResource to its corresponding sensor is done by its key value which is mapped at compile-time to a constant integer by a predefined mapping function (get_key()) in tinyos_coap_ressources.h. Here the key "KEY_TEMP" corresponds to a 0 whereas the key "KEY_HUM" is mapped to 1.
Requesting data from a sensor, the following command needs to be called:
call ReadResource.get[get_key(uri->path.s, uri->path.length)](*id);
In case of an inappropriate call of get() in the application, e.g. for a non existing URI, the default function below must be implemented in the application to handle this exception:
default command error_t ReadResource.get[uint16_t uri_key](coap_tid_t id) { //GET not available for this resource, handle this case return FAIL; }
After the sensor is read, getDone() is signaled and returns the sensor data. The following function handles this event:
event void ReadResource.getDone[uint16_t uri_key](error_t result, coap_tid_t id, uint8_t asyn_message, uint8_t* val_buf, size_t buflen) { //send response with sensor value }
The same implementation holds for the getDoneDeferred() event.
WriteResource
Since the LED resource, for example, provides both, Read- and Write-Resource interfaces, another component (CoapLedResource) is used to provide full access to the LedsC module. While ReadResource provides the get() command, the WriteResource provides the put() command to modify or change the state of a resource.
The interface looks as follows:
interface WriteResource { command error_t put(uint8_t *val, uint8_t buflen, coap_tid_t id); event void putDone(error_t result, coap_tid_t id, uint8_t asyn_message); event void putDoneDeferred(coap_tid_t id); }
For accessing the LED resource, the wiring looks like this:
configuration CoapBlipC { } implementation { CoapBlipP.CoAPServer -> CoapUdpServerC; CoapBlipP.Leds -> LedsC; components new CoapLedResourceC(KEY_LED) as CoapLedResource; CoapLedResource.Leds -> LedsC; CoapUdpServerC.ReadResource[KEY_LED] -> CoapLedResource.ReadResource; CoapUdpServerC.WriteResource[KEY_LED] -> CoapLedResource.WriteResource; }
Accessing the WriteResource out of the application, the put() function as well as its default command have to be implemented.
call WriteResource.put[get_key(uri->path.s, uri->path.length)](buf, *buflen, *id) default command error_t WriteResource.put[uint8_t uri_key](uint8_t* val, uint8_t buflen, coap_tid_t id) { //PUT not available for this resource, handle this case return FAIL; }
putDoneDeferred is currently not implemented but might be used in the future.
CoAPBuffer{Volt|Hum|Temp}Translate
These components are used for calculations of the corresponding SI unit of the received sensor values. By providing and using the Read interface, they can easily be connected between the CoapReadResource and the sensor components to calculate fix-point values (real SI value * 100) of the respective sensor value. These components are hardware dependent and have to be adapted when changing hardware and/or sensors.
For using the Translate components for temperature and humidity, change the above given configuration to
configuration CoapBlipC { } implementation { CoapBlipP.CoAPServer -> CoapUdpServerC; components new SensirionSht11C() as HumTempSensor; components new CoapReadResourceC(uint16_t, KEY_TEMP) as CoapReadTempResource; components new CoapBufferTempTranslateC() as CoapBufferTempTranslate; CoapReadTempResource.Read -> CoapBufferTempTranslate.ReadTemp; CoapBufferTempTranslate.Read -> HumTempSensor.Temperature; CoapUdpServerC.ReadResource[KEY_TEMP] -> CoapReadTempResource.ReadResource;ce; components new CoapReadResourceC(uint16_t, KEY_HUM) as CoapReadHumResource; components new CoapBufferHumTranslateC() as CoapBufferHumTranslate; CoapReadHumResource.Read -> CoapBufferHumTranslate.ReadHum; CoapBufferHumTranslate.Read -> HumTempSensor.Humidity; CoapUdpServerC.ReadResource[KEY_HUM] -> CoapReadHumResource.ReadResource;ce; }
The graph below shows the structure of the CoAP application with the above given wiring.
Further information
Some more information can be found in the following publication:
Koojana Kuladinithi, Olaf Bergmann, Thomas Pötsch, Markus Becker & Carmelita Görg: Implementation of CoAP and its Application in Transport Logistics. In Proc. Of ‘Extending the Internet to Low power and Lossy Networks’ (IP+SN 2011). Chicago, USA. 11th of April 2011. Paper Presentation Slides
There is also a video on youtube.com available: http://www.youtube.com/watch?v=zkB4uDhPblM